flow-rite-plumbing

Installing or Replacing an Electric Water Heater

Support@OnlineCultur.com (Rudy Grippo) — Wed, 22 Feb 2023 05:24:19 GMT

Installing or Upgrading an Electric Water Heater

A Quick Look at the Procedures for Installing or Upgrading an Electric Water Heater

The first step is to turn off the water supply and the circuit breaker.
Second step: Empty the contents of the water heater.
Step 3: Remove the cover from the front of the device.
Installing the heater in the water tank is the fourth step.
Step 5: Attach pipes.
Installation of flow and pressure valves is the sixth step.
Step 7: Bleed hot water system
Step 8: Conduct a thorough examination of the electrical components.
Turning on the circuit breaker is Step 9. Step 10 involves checking the temperature as well as the outlets.

A number of the problems that might occur with water heaters can be fixed. On the other hand, if your existing water heater is particularly old or out of date, it is possible that you may consider replacing it with a more modern model. The average lifespan of a water heater is only ten years, despite the fact that some models have been known to live as long as twenty. Before beginning this process, it is essential that you have a thorough understanding of what you will be getting into if you intend to perform the installation of a tankless electric water heater on your own.

Regardless of the type of do-it-yourself job you intend to finish, planning is one of the most important factors that will determine how successful you are. If you go into a job without the appropriate tools or an understanding of what work needs to be done, it is likely that you will run into problems that could cost you both time and money. If you go into a job with the appropriate tools and an understanding of what work needs to be done, it is likely that you will run into problems.

This tankless electric water heater installation guide has been written out for you in a step-by-step format to help you get started.

Installing a Electric Water Heater Requires You to Turn Off the Circuit Breaker, As Well As the Water Supply.

It is crucial that you turn off the circuit breaker before you begin the project. This will ensure that the electric cables will not be powered on while you are working on them.

At this time, you should also switch off the water supply, unless you want parts of your home to be flooded when you attempt to replace your existing water heater with a new one. In that case, continue with the replacement process without turning off the water supply. Bear in mind that flooding can cause damage that amounts to thousands of dollars; this is the reason why the first step on this list is the most crucial one to take.

When disconnecting your old heater, make sure it is emptied of its fuel.

When removing a water heater of the tank type from your home, you will want to be sure that it has been drained of all of its contents first. In order to accomplish this task, you will need a hose and some sort of container, such as a bucket. Check out our guide for a more in-depth look at how to drain a water heater if you need any additional guidance.

Before you can get rid of the outdated wiring and wall-mounting brackets, the connecting pipes will need to have their screws undone. Throughout this operation, you need to take extra precautions to protect the older plumbing and electrical. In such case, they will have to be fully replaced, which will simply add more time and money to the job.

Remove the cover from the front of the book

Remove the front cover of the new tankless unit using a screwdriver in a careful manner before proceeding with the installation. When you have finished removing all of the screws, put them in a location where it will be difficult for you to misplace them. It is vital to use each and every one of these screws if you want your water heater to work well. It is important to keep in mind that the cover and the device may already have some cords connected to one another. Before you remove the cover completely, make sure that these are unplugged first.

Install the Water Heater in its Location.

After that, it will be necessary to mount the unit to the wall in some fashion. Check to see that the location of your water heater is not one of the areas in your home that is prone to clutter or disorganization. Having said that, it is essential that, in the event of a crisis, you have quick and uncomplicated access to the storage unit. The mounting of the water heater is a straightforward process that just requires a few screws and the mount that was provided in the package. Make sure you are following the instructions that were provided with your item.

Connect Any Pipes

After you have completed the process of mounting the device, you will need to connect the pipes that carry hot water to each room in your house. These connections will enter and exit your water heater at the appropriate times. They ought to be situated in the lower parts of the apparatus. You should consult the installation diagram, which you should have gotten with your unit and which you should have received with your unit in order to establish where the connections should go.

Stainless steel is the material that should be used for the piping in a tankless water heater because it is the most durable. It is able to resist high temperatures without compromising the system's accessibility or its level of flexibility. Copper and polyvinyl chloride (PVC) piping are two suitable substitutes to use in place of stainless steel piping in the event that you do not have access to stainless steel piping. If you choose for a flexible pipe made of stainless steel, you can be sure that the connections can be detached easily, which is beneficial if you want to clean them on a regular basis. This is because stainless steel doesn't rust as easily as other metals. Regular cleanings are encouraged by the majority of instruction manuals.

Set up the flow and pressure valves.

After the connections have been made, it is time to install the flow and pressure valves in the system. The installation of flow valves is a rather straightforward process. They give you the option, in the event that repairs are required, to turn off only the water supply to the heater, rather than having to turn off the water supply to your entire house.

Pressure valves only need to be put in a system if the local plumbing authority mandates their presence. Along the side of the electric water heater designated for "hot water" is where the pressure release valve needs to be put. In order to get the highest possible level of protection, you might additionally put one on the other side of the heater.

Make that the system for the hot water is bleeding correctly.

At this point in the process of installing a new appliance, the water heater has to have all of its connections made and should be completely installed. In spite of this, you will still need to complete the bleeding procedure before you turn on the hot water system. It is important to ensure that each and every hot water outlet in your home is open, as this will assist in the removal of any air that may be present in the system. The bleeding process should be finished after a few minutes have passed during which these openings should be kept open.

Before attaching the cover, make sure that the electrical connections have been inspected.

It is imperative that you invest the time and effort necessary to verify the electrical connections to your water heater in order to protect not just yourself but also any other members of your household who may be present. Check to see that these connections have been wired properly and that they have been positioned at the appropriate terminals. After that, you need to reconnect the lid using each of the screws that were present at the beginning. After the cover has been securely attached to the device in a methodical manner, the procedure of installation is very close to being finished.

Put the breaker for the circuit in the "On" position.

Because you are no longer required to perform any maintenance or repairs on the heater itself, you may now turn on the circuit breaker without risk.

Confirm the temperature, then put the outlets through their paces.

After you have powered up the water heater, the next step is to adjust the temperature settings for t he system. It is suggested that you do not use these devices in order to prevent the risk of receiving burns because they are capable of reaching very high temperatures when set to their maximum settings. At this time, you should also check each and every hot water outlet in your home, including the faucets, showers, dishwashers, and washing machines, to ensure that the temperature is accurate and that the water heats up rapidly. If the water's temperature is unacceptably high, you should probably adjust the temperature settings so that they are lower.

How To Tell If A Water Main Leak Is Your Responsibility or The County's

Support@OnlineCultur.com (Rudy Grippo) — Sat, 07 May 2022 04:21:29 GMT

How To Tell If A Water Main Leak Is Your Responsibility or The County's

Residential properties and commercial businesses depend on service lines to bring water to their buildings nearly every day. Sometimes these service lines need to be maintained or repaired. A water main leak can occur for a variety of reasons. These include a lack of maintenance, weather changes and even old age.

As a homeowner, a leak can fall under your responsibility or the county’s, depending on where the leak occurred. When it’s your responsibility to fix a water main leak, it’s important to have a trusted plumber who understands the importance of the job. Here’s a brief primer on how to tell who will likely need to deal with the leak.

When a Water Main Leak Is the County’s Responsibility

Your front yard might have a manhole or similar structure that houses meters designed to measure water use. There’s a pipe going from these meters out to the water main, and it usually runs underneath the street. A water main is simply a large pipe that connects to your service pipe, which carries water from the main to your home.

When a leak occurs, the county usually is responsible for any leakage that occurs between your water meters and the water main. The only exception would be if you don’t maintain the area in and around your water meters. These meters are crucial to ensuring your water supply, and they must be accessible for the county at all times.

When a Water Main Leak Is Your Responsibility

Did you know that as a homeowner you own the water service lines running through your front yard? In that respect, you’re responsible for the part of the service line that extends from your water meter to your home. If you detect a leak anywhere in your yard, it’s usually your responsibility to have the issue taken care of. That means calling a plumbing expert to get the job done.

Some signs of a water main leak in your front yard include wet spots or pools of water on the ground, sinkholes, rust or dirt in your water supply at home or even an unusually high water bill . If you detect a leak, shut off your water main and call a plumber as soon as possible. The earlier you catch a leak, the more time you have to avoid damage to your home, your property and your neighbor’s property.

Thanks to the high-tech equipment and high standards of professionalism at Flow Rite Plumbing Services, you can rest assured that if you detect a leak, we will solve your problem quickly and efficiently. To learn more about our services or get answers to your questions, contact Flow Rite Plumbing Services .

The Most Common New York Plumbing Issues

Support@OnlineCultur.com (Rudy Grippo) — Thu, 27 Jan 2022 03:45:59 GMT

When a plumbing issue happens in your home for the first time, you may feel like this issue is unique to your particular plumbing system. However, it turns out that certain plumbing problems are more common than others. Continue reading to find out what they are.

Running Toilets

It is commonplace for a homeowner to encounter a running toilet at one point or another. There are a multitude of factors that can contribute to this. A professional plumber will be able to pinpoint the exact cause and apply the proper remedy.

Broken Garbage Disposals

Garbage disposals are designed to break down food waste. However, putting too much food in a garbage disposal can cause it to malfunction. Since many people lose the key that can resolve this issue, they have to rely on the expertise of a plumber to repair it.

Slow Draining Sinks & Tubs

Have you ever noticed that the sinks and tubs in your home take a long time to drain completely? If so, this is an indication that there are materials within the plumbing system that are clogging up the drains. Having your drains cleaned by a professional plumber can help your pipes go with the flow once again.

Are you experiencing any of the aforementioned plumbing problems in your home? If so, trust the professional plumbers here at Flow Rite Plumbing – Sewer & Drain to fix them! To learn more, give us a call at 1-516-206-0174 or visit ou r website .

Have a Water Leak? 5 Signs of A Water Leak

Support@OnlineCultur.com (Rudy Grippo) — Sun, 05 Dec 2021 05:53:10 GMT

Have a Water Leak? 5 Signs of a Water Leak

Water leaks are a known issue and when left undetected can cause significant damage to your home. The best line of defense is to know common signs for a water leak before you ever face one. That way you can call your local plumber in enough time before it is too late.

Keep your eyes open for these five top signs for a water leak in your home .

Higher Water Bill

If you receive a water bill that is higher than your average water bill and you know there hasn't been any known rise in water use, then you could have a water leak somewhere on your property. Call your local licensed master plumber to diagnose the problem.

Running Water Meter

When you suspect a water leak, you can go turn off all the water in your house and then go check your water meter. If you see the water meter still running (the wheel keeps spinning) then you know there is a leak somewhere in your plumbing system. This is one of the best ways to test for a possible leak.

Wet Spots

One of the most common signs of a water leak in your home is a wet spot on your floor, ceiling, or wall. These wet spots, and sometimes warm spots, show up where there is the piping that has probably when piping below the floor that has developed a leak. You may also see mold or staining in the same spot.

Lower Water Pressure

A drop in water pressure is a sign of a potentially large water line rupture. Respond quickly if there is a significant or sudden drop in water pressure by turning off all water to your house and calling your local plumber for help.

Sound of Flowing Water

If you hear the sound of flowing water but no faucets or appliances are turned on, then you definitely have a problem in your home. Listen carefully and find where the sound of flowing water is the loudest so you can help your plumber find the problem quickly. Then turn the water off to your house to keep damages to a minimum.

At Flow Rite Plumbing, we treat your home as if it is our own. We are committed to providing the best service and the best plumbing product.

If you suspect a water leak in your home, then contact us !

Residential Plumbing Problems, What You Should Watch Out For

Support@OnlineCultur.com (Rudy Grippo) — Sun, 05 Dec 2021 05:08:46 GMT

Residential Plumbing Problems, what you should watch Out For

Homeowners on Long Island in Nassau County and surrounding areas have probably experienced plumbing issues at least once. If you do not address the matters promptly, they may trigger larger problems in the future. As such, it is critical to have the skills of identifying malfunctions handy to fix the faults on time and avert a plumbing disaster.

Tell-Tale Signs of Plumbing Problems

Water is life. As cliché as it may sound, you need water to conduct almost every activity in your daily routine. Having a faulty plumbing system means that you might be unable to perform the simplest of activities, for instance, brushing your teeth. It can be annoying to take what seems like a century to brush your teeth or finish a bath simply because the water is not draining. If you are experiencing signs such as escalated water bills, slow drains, and odor emanating from your drainage system, you're probably dealing with a plumbing menace. At this point, it would be wise to get an expert plumbing service provider to identify and fix the exact issue. Before then, read on to find out more about the common plumbing problems you should never ignore.

Clogged Plumbing Fixtures . Clogs in sewer and kitchen drain lines trigger water stagnation or slow drainage in toilet bowls, sinks, and bathtubs. Once you notice a problem, you ought to talk to a licensed master plumber to fix the defect. With that, you will deter sewer and grey water backflows into your home.

Leakages . Leakages in plumbing systems are common and sometimes hard to identify. Dripping sounds, hiked water bills, wet spots, low water pressure, and a running water meter can imply your plumbing system has a leakage problem. The ideal thing to do when in such a situation is to get a plumber to inspect the whole system to trace and fix the leak. The expert can also install leak detectors that will notify you whenever a leak occurs.

Defective Water Heaters . Identifying water heater p roblems with naked eyes can be difficult. However, you will definitely notice when taking a shower and you experience extreme icy or hot water flow, or the water takes too long to heat up. Additionally, the water may be discolored or come with a pungent smell. You may also have odd popping or rumbling noises that may indicate you need your water heater serviced. If you have any arising concerns, the age of a water heater is an important factor to consider, in some cases it may be best for an expert plumber to recommend replacing an old water heater instead of constant repairs.

The Importance of Effective Plumbing Systems

Plumbing systems supply clean water into homes and eliminate liquid and human waste. Having a functioning plumbing system guarantees sanitation in your residence, making you and your family evade health complications. A working plumbing system also helps prevent possible electrical accidents and a collapse of the whole building due to structural damage to the foundation by underground leaking pipes or basement flooding.

Get The Best the Plumbing Industry has to offer from a Plumbing Expert at Flow Rite Plumbing

At Flow Rite Plumbing, we address day-to-day plumbing problems facing homeowners in Baldwin, Rockville Centre, Great Neck and many other towns of Long Island in Nassau County NY, area. Flow Rite Plumbing provides licensed master plumbers with over 30 years of plumbing experience, our company has plumbers who are proficient in the installation, repair, and maintenance of plumbing systems. From detecting leaks to water conservation, we can take care of all your plumbing woes. All you have to do when faced with a plumbing problem is contact us , and one of our experts will reach out to you within no time.

Are Slab Leaks Covered By Home Insurance?

Support@OnlineCultur.com (Rudy Grippo) — Mon, 04 Oct 2021 20:14:59 GMT

Are Slab Leaks Covered By Home Insurance?

If you have a slab leak, you need to take action quickly to fix it. Detecting a slab leak might be the hardest part. The first symptom of a slab leak that you will most likely notice is when you see a puddle coming up from your floor that did not get there from rain or other overhead water source. Once you know you have a slab leak, then what?

Home Insurance and Slab Leaks

While every home insurance is different, in most cases your home insurance policy will cover your slab leak. File your claim as soon as you notice a problem. You should also take care to note if there has been recent rain or flooding. If your slab is leaking because of a plumbing problem, that is likely to be covered by your insurance.

Home insurance will not cover your slab leak if the leak is a result of a flood. In that case, if you live in an area where flooding is possible, you should have flood insurance, and that insurance might cover the slab repair.

Why a Plumber Is Necessary

While you might be able to fix a slab leak yourself, it is going to require a lot of manpower and a lot of special tools. Since your home insurance most likely will cover the cost of a repair, it is oftentimes easier to let a professional plumber repair your slab leak. A plumber is also likely to get to the root of the problem. While you might be able to fix the slab yourself, what caused the slab to leak? Was it a result of faulty plumbing? That can only be ascertained by a licensed plumber.

How We Can Help

At Flow Rite Plumbing, we specialize in slab leaks and leak detection. And we are here to help you with a slab leak or any other plumbing concern you have. Reach out and contact us today for any plumbing questions you have!

How To Turn Off the Water to Your House

Support@OnlineCultur.com (Rudy Grippo) — Sat, 18 Sep 2021 03:50:57 GMT

How To Turn Off The Water Main To Your House

Knowing how to get in the meter box to turn off water to your house can save you money during a plumbing emergency. It is easy and anyone living in your house should know how.

The following steps are a quick, simple way to turn the water to your house off at the water meter. Or, you can watch how to do it here:

Step One

First, you need the proper tools to get in the meter box and turn the valve off. The tools you need are a meter key and a valve wrench. There are multiple you can use.

Step Two

Once you have the tools you need, you need to loc ate your water meter. Sometimes it is by the street in the front yard. Other times it’s in the driveway. You need to know where your water meter is, because it could be in a unique location.

Step Three

After you locate the water meter, use the meter key to unlatch and take off the lid. All you have to do is put in the key, turn it, and pull the lid off.

Step Four

Now the lid is off and you should see an arrow pointing toward the water meter. To turn it off, use the wrench to turn the valve. The arrow should now face the house, away from the meter, with the holes lined up.

The water is now off. To turn it back on, point the arrow back toward the meter without the holes lined up. The holes are where the city can put a lock to keep your water off.

Now you know how to turn your water off and back on. Make sure everyone in the family knows how to do this in case of a plumbing emergency . Doing this can save you thousands of dollars.

For any questions, please call us at 516-206-0174 or message us on Facebook . To read more of our blogs , click here .

How to Flush a Tankless Water Heater

Support@OnlineCultur.com (Rudy Grippo) — Mon, 15 Feb 2021 03:57:49 GMT

How to Flush a Tankless Water Heater

Tankless water heaters have many benefits, making your life easier. Because of this, tankless water heaters are rapidly increasing in popularity.

To maximize the benefits of a tankless water heater, it needs to be flushed once a year. This blog teaches a quick and easy way to flush a tankless water heater.

A nyone with the right tools can flush a tankless water heater. The tools you’ll need include a pair of pliers and a circulation pump. The pump will circulate the fluid through the inlet and outlet while the water is off.

The first thing you need to do is make sure there are valves for flushing. You have an inlet and an outlet because you want to go in the same direction as the water.

Next, you’ll need to turn off the isolation valves. Turning the valves completely isolates the tankless water heater from the house.

After you’ve isolated the water heater, you’re going to hook up the hoses. Washing machine hoses work great. Make sure the hoses are on tight so it doesn’t leak.

Next, take the other end of the cold water inlet hose and attach it to the discharge side of the circulation pump. You can tell the discharge side from the inlet side because the inlet side has a filter. Once it’s attached and snug, drop it into the bucket.

For the hot water side, all you have to do is drop it in the bucket to create a closed-loop system. The chemical in the water will pump through the system and go up through the heat exchanger. This cleans the calcium and magnesium build up inside the heat exchanger.

In your bucket of water, add the chemical cleansing agent. Now, open the inlet and outlet valve to open the flow path. All you have to do now is plug it in and let it circulate for 30 minutes.

One thing to do before deciding to flush your tankless water heater is to make sure it has flush valves. It’s important to shut off the water to the rest of the house so the chemical doesn’t go through the entire system.

Now that you’re done circulating, unplug the pump so there’s no more chemical going through it. You’ll want to close the valve on the cold side that lets the chemical in and loosen the hose so it drains back down into the bucket.

Next, pour out the bucket so you can flush the system. Open up the cold inlet valve to the water heater so you can flush it out with fresh water. Do this three or four times, then run a pH test on the water to make sure everything is good.

Now that everything is flushed, close the control valve and turn the water back on to the house. Now everything is set and good. That’s all there is to it.

An important thing to remember is to be careful. Tankless water heaters heat water very rapidly. The water coming out will get hot, so be careful when filling the bucket. You also need to protect yourself to make sure you don’t get any chemical from the water on you.

If you want to save money, the trick is to use vinegar instead of the chemical. However, if using vinegar, let it circle for about an hour and a half to two hours.

As you can see, flushing a tankless water heater isn’t hard to do. Learn to do this, and you’ll be the go-to in your neighborhood.

For any questions, please call us at 516-206.0174

Article Author : Riley Karr

Garbage Disposal Leaking?

Support@OnlineCultur.com (Rudy Grippo) — Sun, 01 Nov 2020 15:42:28 GMT

Is My Garbage Disposal Leaking?

Garbage disposals usually leak from three places: the top, the pipe connections, and the bottom. To find out if your disposal is leaking, check each common place where leaks start. Use a flashlight to check for condensation, puddling, and other signs of water accumulation on or beneath your disposal.

Each common garbage disposal leak happens for a different reason. Usually, a minor component is simply too loose or it’s worn out. By finding where your garbage disposal is leaking, you’ll be able figure out why it’s leaking and how you can fix it. Here’s everything you need to know to fix your garbage disposal’s leak quickly and accurately.

Where is my garbage disposal leaking from?

There are a few spots to check regarding a Garbage disposal leak:

At the top of the garbage disposal is what's known as the "The sink flange". This is where the sink and your garbage disposal are connected.
The hose connecting your garbage disposal to your dishwasher. This hose is flexible and typically made of made of plastic connecting your dishwasher to your garbage disposal.
"The drain line connection". This is regarding your main drain pipe and how it connects to your garbage disposal.
The "reset button" on the bottom of the disposal. This button causes the garbage disposal to shutdown in the event there is

some sort of jam in the disposal or if the motor overloads.

How can I tell if my garbage disposal is leaking?

Checking under your kitchen sink is the first step. If you do have an easy to spot leak you'll possibly see puddles, dampness, dripping, or a musty smell. If you see any signs of leaking, check and make sure the leak isn't coming from the sink. Unless you have lighting under you sink, a flash light would be great to grab to look for common garbage disposal leaks.

At this point shut the garbage disposal off and unplug it. After that, fill up the sink halfway. If you have any food coloring adding it to the water will make spotting the leak a whole lot easier :

Starting from the top, The sink flange: Check for dripping or water accumulation around the top and bottom of the ring of the flange. Use the flashlight to look for water coloring and feel for wetness by hand.
The dishwasher hose connection: To properly look for this leak, you’ll have to run your dishwasher. Start the dishwasher without turning back on the disposal. Watch the hose as water runs from the dishwasher drain through it into the disposal. Pay particular attention to the connections between the hose and disposal.
The drain line connection: Check the connection between the drain line and disposal. Pay particular attention to the screws that fasten the line to the disposal and to the gap between the disposal and drain line.
The reset button: The reset button is in the center of the bottom of the disposal unit. Shine the flashlight under the disposal to look for it. Check for a slow, constant dripping or water accumulation beneath the unit.

Why is my garbage disposal leaking?

Each of the four common leaks outlined so far have different causes and fixes. Here’s where your leak is coming from and what caused it:

The sink flange: The sink flange is held in place by plumber’s putty and bolts. If the putty deteriorates or the bolts rust or loosen, the watertight seal between the flange and sink may break, leading to your leak.
The dishwasher hose connection: If the dishwasher hose is leaking, it’s usually because the screws holding it to the disposal have loosened. This can happen because of rust or simply as a result of time and jostling. It’s also possible the drain hose or clamp are leaking.
The drain line connection: If the drain line is leaking, then either the screws securing to the disposal have worn out, or the rubber gasket inside the mounting assembly itself is leaking. Remove the screws, take down the drain line, and check the gasket inside for signs of wear and tear.
The reset button: If your garbage disposal is leaking from either the reset button or any other part of the bottom of the disposal, then it probably means a seal inside the unit itself has worn out. This can happen when a garbage disposal gets old.

How to Fix a Leaking Garbage Disposal

Now that you’ve identified the where and why, you’re prepared to fix the actual problem. Luckily, fixing a leaking garbage disposal is usually pretty straightforward–even if the fix isn’t always what you’d like to hear:

The sink flange: Unscrew the bolts and check for rust or other deterioration, and replace them if you find any. Then, remove the flange, scrap off the putty holding it in place, and reapply fresh putty. Turn back on the water to test the seal.
The dishwasher hose connection: First, try using a screwdriver to tighten the screws on the metal clamp connecting the hose to the disposal. If the screws don’t seem to tighten properly, consider replacing them. It’s also possible the hose itself is leaking, in which case you’ll have to replace it.
The drain line connection: You may be able to fix this leak by tightening the connection between the pipe and disposal. Try un-attaching and reattaching the pipe if tightening doesn’t work. If you’re still having issues, try replacing the screws or gasket. You could also use a pipe clamp and tighten with a screwdriver.
The reset button: Unfortunately, if your garbage disposal leaks from the bottom, then it’s probably simply time to remove the garbage disposal and replace it. If one internal seal is worn out, after all, then the rest are probably getting there too.

These leaks can be fixed if you're able to follow these simple suggestions. Should you do so and still experience leaks or you just need to ask some questions, feel free to call Flow Rite Plumbing . We’ve got everything we need to handle any garbage disposal problem you can throw at us.

Sewer Inspection Can Save You Thousands

Support@OnlineCultur.com (Rudy Grippo) — Mon, 08 Apr 2019 13:14:59 GMT

Sewer Inspection Can Save You Thousands

Every real estate transaction has an inspection, but do you hire a plumber to do sewer inspection? Fixing sewer lines is a common job. Too often we hear the customer just bought the house with messed up sewer lines.

We recommend every real estate agent protect their clients by doing a sewer inspection to inspect lines for damage. A sewer inspection can save you thousands of dollars in sewer repairs.

If you’re a homeowner, sewer leaks can lead to foundation problems which can be expensive. When we’re talking about sewer leaks, consider how old your house is. If your house was built before the ’80s, the cast-iron under your house will start rusting.

After time, the coating on the cast-iron pipe starts to deteriorate, causing the pipe to rust. Pressure from the house can also cause the pipes to split right along the top.

If you inspect it before you have a problem, it can possibly save your house from a lot of damage. When people realize they have sewer leaks, they either have water backing up in the house or a buyer wants to do a sewer inspection.

We recommend every realtor tell their buyers to do sewer inspection on any house they’re buying. The last thing you want to do is to buy a house, just to have to spend more money fixing the sewer or water lines.

The two reasons people usually get sewer inspection are:

Preventative maintenance: make sure there are no costly repairs later
Buying a house

Costly repairs are the biggest problem when it comes to taking care of your plumbing system. Homeowners should invest money in sewer inspection because its less expensive than an under slab leak repair.

Age and time can lead to deterioration of the pipes. Another problem is the roots. Roots also lead to foundation problems.

Sewer repairs and water repairs under a slab are all expensive. Testing a sewer to find out what’s wrong with it is a good idea.

To test it, put in a test ball and fill up the system to see if it holds water. Next, you’ll want to run a camera. Running a camera helps to see as many lines as possible.

Although having sewer inspection is something you probably don’t want to do, its still a good idea. If you think you may have foundation problems, contact your plumbing company to take care of it before it gets too bad.

For any questions, please call us at 516.206.0174

Article Author : Riley Karr

Do You Have a Water Leak? Check for These 5 Top Signs

Support@OnlineCultur.com (Rudy Grippo) — Mon, 08 Apr 2019 13:14:59 GMT

Do You Have a Water Leak? Look for These 5 Signs

Keep your eyes open for these five top signs for a water leak in your home.

Higher Water Bill

Running Water Meter

Wet Spots
One of the most common signs of a water leak in your home is a wet spot on your floor, ceiling, or wall. These wet spots, and sometimes warm spots, show up where there is the piping that has probably when piping below the floor that has developed a leak. You may also see mold or staining in the same spot.

Lower Water Pressure
A drop in water pressure is a sign of a potentially large water line rupture. Respond quickly if there is a significant or sudden drop in water pressure by turning off all water to your house and calling your local plumber for help.

Sound of Flowing Water

If you hear the sound of flowing water but no faucets or appliances are turned on then you definitely have a problem in your home. Listen carefully and find where the sound of flowing water is the loudest so you can help your plumber find the problem quickly. Then turn the water off to your house to keep damages to a minimum.

If you suspect a water leak in your home, then contact us !

flow-rite-plumbing

Installing or Replacing an Electric Water Heater

Installing or Upgrading an Electric Water Heater

A Quick Look at the Procedures for Installing or Upgrading an Electric Water Heater

How To Tell If A Water Main Leak Is Your Responsibility or The County's

How To Tell If A Water Main Leak Is Your Responsibility or The County's

When a Water Main Leak Is the County’s Responsibility ﻿

When a Water Main Leak Is Your Responsibility

The Most Common New York Plumbing Issues

Have a Water Leak? 5 Signs of A Water Leak

Have a Water Leak? 5 Signs of a Water Leak

Higher Water Bill

Running Water Meter

Wet Spots

Lower Water Pressure

Residential Plumbing Problems, What You Should Watch Out For

Residential Plumbing Problems, what you should watch Out For

Tell-Tale Signs of Plumbing Problems

The Importance of Effective Plumbing Systems

Get The Best the Plumbing Industry has to offer from a Plumbing Expert at Flow Rite Plumbing

Are Slab Leaks Covered By Home Insurance?

Are Slab Leaks Covered By Home Insurance?

Home Insurance and Slab Leaks

Why a Plumber Is Necessary

How To Turn Off the Water to Your House

How To Turn Off The Water Main To Your House

How to Flush a Tankless Water Heater

How to Flush a Tankless Water Heater

Garbage Disposal Leaking?

Is My Garbage Disposal Leaking?

Where is my garbage disposal leaking from?

How can I tell if my garbage disposal is leaking?

Why is my garbage disposal leaking?

How to Fix a Leaking Garbage Disposal

Sewer Inspection Can Save You Thousands

Sewer Inspection Can Save You Thousands

Do You Have a Water Leak? Check for These 5 Top Signs

Do You Have a Water Leak? Look for These 5 Signs

When a Water Main Leak Is the County’s Responsibility